rectangular finite element
英 [rekˈtæŋɡjələ(r) ˈfaɪnaɪt ˈelɪmənt]
美 [rekˈtæŋɡjələr ˈfaɪnaɪt ˈelɪmənt]
网络 矩形有限元素
双语例句
- Axial crashworthiness optimization of thin-walled rectangular beam based on finite element method
基于有限元法的矩形薄壁梁轴向耐撞性能优化 - On the basis of a large volume of pure copper sheet metal rectangular case drawing experiments combining finite element computation, this paper analyzed drawing characteristic of rectangular case.
在大量纯铜薄板矩形盒拉深试验的基础上，结合有限元计算，分析了矩形盒的拉深特性。 - Streamline-Diffusion Method of An Unconventional Hermite-Type Rectangular Finite Element for First-order Hyperbolic Equations
一阶双曲方程非常规型矩形元的流线扩散法 - A Rectangular Finite Element for Singular Perturbed Darcy-Stokes Problem
奇异摄动Darcy-Stokes问题的一个矩形有限元 - In this paper, a new unconventional numerical quadrature with fewer node values is established based on a special nonconforming rectangular finite element.
利用一个特殊非协调矩形元导出了一个新的使用节点少而代数精度高的非常规数值积分公式。 - The buckling behavior of cylindrical shells with large rectangular opening was analyzed by the finite element method.
利用数值方法研究了开有矩形大开孔的薄壁圆柱壳在轴压作用下的屈曲性能。 - Calculation of Skin Effect Coefficient of Rectangular Bus Bars Using the Finite Element Method
用有限元方法计算矩形母线的集肤效应 - An example for a rectangular sectional cavity and submerged spherical shell are simulated with the finite element method.
并以矩形封闭空间和水下球形壳体为例，进行了模态和声辐射的有限元分析，说明了有限元计算声振耦合问题的可行性和准确性。 - Analysis of circular groove to rectangular waveguide junction using finite element method
圆形槽波导到矩形波导结的有限元分析 - The mechanical model of femur mid-diaphysis with a rectangular open section in the exterior cortex was developed and a finite element method was adopted in calculating and analysing the changes of torsional stiffness and the stress distribution when the dimension of the open section altered.
建立一个股骨中段的外侧皮质带有矩形开口的力学模型，采用有限元方法，计算骨开口区的尺寸改变时，股骨的扭转刚度和应力分布的变化。 - To get the topology optimization of plane non-uniform continuum, the non-uniform thickness rectangular finite element was presented.
提出了用变厚度矩形有限单元求解变厚度平面连续体拓扑优化问题的方法。 - In this paper, anisotropic nonconforming rectangular finite element approximation to the second order parabolic equations is studied. The optimal error estimate same as the traditional finite element methods is obtained by use of the special properties of the element and some novel techniques.
讨论了各向异性非协调矩形元对二阶抛物方程的逼近，利用该单元的特殊性质及新的技巧，在各向异性网格下得到了与传统有限元方法完全相同的最优的误差估计。 - The mechanical response of a complex thin-walled rectangular structure subjected internal pressure load is investigated numerically based on finite element analysis ( FEA) code MSC.
对复杂薄壁箱形结构在内压载荷下的力学响应和承载能力进行数值分析。 - A nonconforming rectangular mixed finite element is proposed, then it is applied to the stationary Stokes. The optimal approximation error and consistency error are obtained.
提出了一个新的矩形非协调混合元格式，把它应用于Stokes问题的数值逼近，得到了最优的误差估计。 - A rectangular finite element for laminated plate with bonded and/ or embedded piezoelectric sensors and actuators is developed based on the variational principle and the first order shear deformation theory.
基于变分原理和一阶剪切理论，本文建立了一种新的机电耦合矩形有限单元，该单元具有四个节点20个位移自由度，电自由度为单元中的压电铺层层数。 - In the first part, we focus on a V-cycle multigrid method for a Hermite-type rectangular finite element.
第一部分对一个Hermite型矩形元的V循环多重网格方法进行了研究，定义了新的网格依赖内积（？） - The paper presents a quadrilateral mesh generation algorithm for a complicated planar structure which has been divided into several subarea ── the thought of planar MAP rectangular finite element, and a program is made to test the algorithm. Running results show that it is effective.
给出了一种对于复杂结构进行分区域规划的有限元剖分算法&平面MAP四边形元素剖分算法的思想及方法，并将算法编制了实用程序，实际运行结果理想。 - In order to research axial load level of columns 'effect on the ductility of concrete-filled rectangular tubular frame, its nonlinear finite element analysis model was built.
为了研究框架柱的轴压比对方钢管混凝土框架延性的影响，建立了方钢管混凝土框架结构的非线性有限元分析模型。 - In this paper the transient response of rectangular thin plates subjected to impulsive loads in analyzed by the finite element method in space and difference for time intergration.
本文用空间有限元、时间差分法分析了受冲击荷载的矩形固支板的动力响应。 - Interior Superconvergence for a Rectangular Finite Element with 12 Parameters
12参数矩形元的内部超收敛 - In this paper, based on the generalized variational principle of plates, the buckled states of rectangular plates under uniaxial compression are studied by use of the finite element method and the numerical analysis results under various boundary conditions are obtained by using the continuation calculation method.
本文根据薄板的广义变分原理，用有限元法对单向受压矩形板的屈曲状态进行了讨论，并用延续算法获得了在不同边界条件下的屈曲状态。 - The stress and nonlinearity of the rectangular island structure is studied by using the nonlinear theory and the finite element method ( ANSYS).
运用非线性理论及有限元方法（ANSYS）研究了矩形岛结构的应力和非线性。 - Short-circuit Force Computation of Three-phase Busbars with Rectangular Cross-sections Using the Finite Element Method
用有限元法计算三相矩形母线的短路电动力 - Rectangular finite element method with moving grid for parabolic problem
抛物问题的一类变网格矩形有限元方法 - Numerical results for rectangular and cylinder cavity resonance demonstrate the efficiency of the symplectic finite element method.
文末分别对矩形及圆柱形的共振腔做了数值计算并与解析解和棱边元计算结果进行对比，算例表明了列式及算法的有效性。 - A nonconforming rectangular mixed finite element for Stokes problem
Stokes问题一个矩形非协调元逼近 - Superconvergence of rectangular finite element method for nonlinear elliptic problem
非线性椭圆问题矩形有限元的超收敛性 - The nonlinear analysis of reinforced concrete rectangular slabs under monotonic transverse loads is performed by finite element method, The layered rectangular element with 4 nodes and 20 degrees of freedom is deve-loped, in which bending/ stretching coupling effect is taken into account.
用有限元法对单调横向荷载作用下的钢筋混凝土矩形板作了非线性分析.建立了考虑板中弯曲-拉（压）耦合效应的4节点20自由度分层矩形单元模式。 - The dominant factors influenced on deep drawing forming of a rectangular box have been analyzed by using theoretic analysis and finite element method ( FEM) simulation, and then the identification model of parameters for a rectangular box is determined.
利用理论解析和有限元仿真模拟等研究手段，分析了对盒形件拉深成形有影响的主要因素，从而确定盒形件智能拉深过程中的参数识别模型。 - Then, a 2D plane model is created for the composite, in which the distribution of fibers is regular and uniform, that is meshed using 2-nodes rectangular element. A Finite Element Method program is coded and compiled.
然后，在纤维周期性均匀分布的情况下，对复合材料建立二维平面模型、采用四节点四边形单元进行网络划分并编写了有限元数值计算程序。